Page 1 of 1
Intake Plenum
Posted: Fri May 04, 2018 7:25 am
by 82m
Has anyone ever tried putting the lower intake plenum from a z31 onto the z32?
Or know any reasons why it could not work? I realise the heads are different but how different?
Cheers
Posted: Fri May 04, 2018 1:42 pm
by 85_z31
Hi Mate
I'm one of the few on here with a Modified Z31
The Difference in the lower intake manifolds is quite different so they wont bolt up, In theory it could be done with a thick enough adapter plate
I have been working in with DJZ on here to design a better performing plenum for a Z31.
There is quite a lot of Z31 Plenum Idea's on Z31performance.com and also the Z31online facebook groups. For something really nice its going to be a fabrication required type deal.
A lot of People use a Nissan Terrano v6 Plenum as a core to build an RB/ Supra style tapered plenum.
Posted: Thu May 17, 2018 12:03 pm
by fome dome
I am running an early vg30det inlet manifold a lot larger inlet ports but you can port match the inlets to match the inlet runners easy enough.
Posted: Fri May 18, 2018 7:16 am
by 82m
Cheers mate. That looks exactly what im after. Is that in your z32?
Posted: Sun May 20, 2018 10:15 am
by fome dome
Yea ill start a build thread up later.
Those Det motors are hard to find unfortunately.
Are you going turbo or NA?