350Z Goodies
350Z Goodies
I have a set of four Factory 18" 350Z bronze alloys, Tyres still mounted three ok - one worn. Looking for about $500, quick sale
I also have a Motordyne MREV2 lower plenum and Stillen High flow intake, offers? seeing if theres any interest. Car is being sold this week / weekend
I also have a Motordyne MREV2 lower plenum and Stillen High flow intake, offers? seeing if theres any interest. Car is being sold this week / weekend
Last edited by OMSIN on Mon Oct 06, 2014 8:59 pm, edited 1 time in total.
-
- Z Club Member
- Posts: 163
- Location: Auckland
Any chance of a photo of the alloys?
It's always a good day when you drive a Z
I know I said $500 in my original post, but would $600 be a deal breaker , I've just had a quick look at what some people have been trying to sell theirs for
2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
-
- Z Club Member
- Posts: 163
- Location: Auckland
Thanks for the photos
Will have to think about it and see if the budget will stretch
Looking to fit them on my 300zx
I have seen several on YouTube with this style of wheel, which look really good
Will have to think about it and see if the budget will stretch
Looking to fit them on my 300zx
I have seen several on YouTube with this style of wheel, which look really good
It's always a good day when you drive a Z
- andy_cliff
- Posts: 130
- Location: Christchurch
Good price!OMSIN wrote:I know I said $500 in my original post, but would $600 be a deal breaker , I've just had a quick look at what some people have been trying to sell theirs for
2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
How much are you looking at for the lower plenum and or the intake boss?
Cheers!
Yea, figured I'd be nice seeing as its a club an allandy_cliff wrote:Good price!OMSIN wrote:I know I said $500 in my original post, but would $600 be a deal breaker , I've just had a quick look at what some people have been trying to sell theirs for
2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
How much are you looking at for the lower plenum and or the intake boss?
Cheers!
Make an offer, Just keep in mind The MREV2 / spacer package and Intake would cost $900+ US ex postage
-
- Z Club Member
- Posts: 163
- Location: Auckland
Hi from what I can find it looks ok
The std 300 runs 225 50 R16" and the numbers look like this
16" x 7.5" (190.5) 45mm offset = mount face to outside edge 50.25mm = mount face to inside edge 140.25mm
Your wheels are called touring 18" v.2 and are staggered
18" x 8" (203.2) 30mm offset = mount face to outside edge71.6mm = mount face to inside edge 131.6mm
18" x 8.5" (215.9) 33mm offset = mount face to outside edge 75mm = mount face to inside edge 140.9mm
The outside edge will be close to the guard (may need to roll the inner lip )
But the inside will be fine
This just leaves the difference in tire size 43.6mm taller for the 245 45 R18s
The only way will be to test fit, unless anyone reading has any experience with the z32 and fitting 350z touring 18" v.2 alloy wheels and tires?
The std 300 runs 225 50 R16" and the numbers look like this
16" x 7.5" (190.5) 45mm offset = mount face to outside edge 50.25mm = mount face to inside edge 140.25mm
Your wheels are called touring 18" v.2 and are staggered
18" x 8" (203.2) 30mm offset = mount face to outside edge71.6mm = mount face to inside edge 131.6mm
18" x 8.5" (215.9) 33mm offset = mount face to outside edge 75mm = mount face to inside edge 140.9mm
The outside edge will be close to the guard (may need to roll the inner lip )
But the inside will be fine
This just leaves the difference in tire size 43.6mm taller for the 245 45 R18s
The only way will be to test fit, unless anyone reading has any experience with the z32 and fitting 350z touring 18" v.2 alloy wheels and tires?
It's always a good day when you drive a Z
- andy_cliff
- Posts: 130
- Location: Christchurch
Hey OMSIN, would you consider selling the spacer separately? As im looking at buying one online, but if I can help you out, I may aswell.OMSIN wrote:Last chance before it goes on Trademe
$500 for the wheels
Will take offers anywhere around $400 for the MREV2 plenum + spacer and Stillen intake (hasn't been installed very long)
If so, what brand is it & what size?
Cheers!
Test fit will be fine, will just have to arrange a suitable time. The car dealer has mounted 245 45s 18 tyres on all rims, so not sure which are front / rear from factory, just how they were before they were taken offGreensheep wrote:Hi from what I can find it looks ok
The std 300 runs 225 50 R16" and the numbers look like this
16" x 7.5" (190.5) 45mm offset = mount face to outside edge 50.25mm = mount face to inside edge 140.25mm
Your wheels are called touring 18" v.2 and are staggered
18" x 8" (203.2) 30mm offset = mount face to outside edge71.6mm = mount face to inside edge 131.6mm
18" x 8.5" (215.9) 33mm offset = mount face to outside edge 75mm = mount face to inside edge 140.9mm
The outside edge will be close to the guard (may need to roll the inner lip )
But the inside will be fine
This just leaves the difference in tire size 43.6mm taller for the 245 45 R18s
The only way will be to test fit, unless anyone reading has any experience with the z32 and fitting 350z touring 18" v.2 alloy wheels and tires?