Moving a ZX with no front end

ZYX · Post by **ZYX** » Sat Sep 14, 2013 5:35 pm

I need to tow or truck my parts ZX. It has rear wheels only at the moment, and I need to be able to roll it onto a truck. Ideas? I'd thought of a trailer axle, or similar, but has anyone got a better idea?

nzeder · Post by **nzeder** » Sat Sep 14, 2013 5:45 pm

Do you have a spare front cross member? Can that be bolted into the car/shell? We have done that in the past with a large caster wheel bolted to the cross member this with the rear of the car rolling means you can get it into a trailer or truck.

Cheers
Mike

old_datto_fan · Post by **old_datto_fan** » Sat Sep 14, 2013 9:37 pm

I have some castors you can borrow.

old_datto_fan · Post by **old_datto_fan** » Sat Sep 14, 2013 9:42 pm

Or some Gojacks you can borrow, use with a wooden beam where the crossmember goes. I have a good wooden beam here too. Could deliver during the week if that helps.