260 speedo cable

If your post does not fit under any of the other technical forums post it here
Post Reply
User avatar
mike260z
Posts: 456
Location: Auckland

260 speedo cable

Post by mike260z » Tue Aug 01, 2006 12:09 pm

Hey there guys , I was just wondering if a 280 speedo cable will fit into a 260 box and dash? when i brought my car it had its speedo cable snapped off in the gearbox by the previous owner and im trying to find a replacement but these things dont grow on trees. Thanks for any help

User avatar
geordieggg
Posts: 91
Location: Watching the polar bears walk past.............

Post by geordieggg » Tue Aug 01, 2006 1:05 pm

If you get really stuck there'll be companies around that can make new ones, you'll need as much of your old one as possible as a sample. If it's just the inner that's gone and the casing is still good, find one of these companies and get them to make a new inner.

Just a thought.
Image

User avatar
mike260z
Posts: 456
Location: Auckland

Post by mike260z » Wed Aug 02, 2006 6:28 pm

Thanks for the tip , yes i still have both bits but one end is stuck in gearbox.

User avatar
240z
Z Club Member
Posts: 251
Location: Auckland

Post by 240z » Wed Aug 02, 2006 10:14 pm

Hi Guys

I had the same problem with a broken inner cable a couple of years ago so went to picka part and went through all the old datsun rwd saloons 180bs bluebirds ect some of them are the right length. Happy hunting

Post Reply