I have just listed 3 auctions for my 47mm OER carbs on TradeMe. Carbs are damaged but for someone with access to the right equipment not too hard to repair. Have listed seperately in case someone only wants one or two so be quick if you are interested and want all 3.
See http://www.trademe.co.nz/Browse/Listing ... =237175680
OER 47mm Carbs
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
No, I think the plan was to drill a hole right through, tap that and put in a plug, drill and tap a new hole in the plug, machine the plug to suit the bore of the carb and then drill a new hole in to the side of the plug to get the fuel in there. Or something like that, the sort of stuff I leave to someone who knows what they are doing.
Trouble is they have been sitting there waiting for my machine shop to do it and I keep getting put to the back of the queue so I decided to see if I could sell them in their current state as I was going to sell them once they were fixed anyway.
Trouble is they have been sitting there waiting for my machine shop to do it and I keep getting put to the back of the queue so I decided to see if I could sell them in their current state as I was going to sell them once they were fixed anyway.