240Z 260Z parts
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
240Z 260Z parts
It's time for a bit of a clean out of some of the bits I have been accumulating as I need to empty out one of the lockups.
I'm going to list most of this stuff on TradeMe over the next few days but if anyone on here is interested then please contact me.
Triple carb inlet manifold - no branding on it - now sold
240Z Arm Rest for Centre Console
Rear spoiler
G-nose front - well most of it anyway
E88 bare head
Fuel injection manifolds, 1 complete, the other mostly there.
DBA545 vented front rotors from Mazda MX5 - drilled to suit 240Z, works with Toyota caliper conversion
240Z Mesh grille - I don't really want to sell this unless someone makes me an offer I can't refuse
Triangular Front Strut Brace - on TradeMe
Electric Water Pump - on TradeMe
Competition Oil Pump Springs - on TradeMe
More to come once I start tidying stuff.
I'm going to list most of this stuff on TradeMe over the next few days but if anyone on here is interested then please contact me.
Triple carb inlet manifold - no branding on it - now sold
240Z Arm Rest for Centre Console
Rear spoiler
G-nose front - well most of it anyway
E88 bare head
Fuel injection manifolds, 1 complete, the other mostly there.
DBA545 vented front rotors from Mazda MX5 - drilled to suit 240Z, works with Toyota caliper conversion
240Z Mesh grille - I don't really want to sell this unless someone makes me an offer I can't refuse
Triangular Front Strut Brace - on TradeMe
Electric Water Pump - on TradeMe
Competition Oil Pump Springs - on TradeMe
More to come once I start tidying stuff.
Last edited by old_datto_fan on Thu Aug 20, 2009 9:20 pm, edited 3 times in total.
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
$50 for the manifold - suits triple Weber/Dellorto etc 40 or 45 DCOE. Its not the nicest looking manifold but for all I know may be something special. Picture attached. It doesn't have any posts for a throttle bar or anything.
Rotors are brand new and I think they bolt straight up although I never fitted them. You do need the wider of the two Toyota calipers. Cost me a small fortune to buy them and get the stud holes and centre hole machined to suit but I will let them go for $300 to another forum member. They are DBA 545 if you want to do some research on them.
Rotors are brand new and I think they bolt straight up although I never fitted them. You do need the wider of the two Toyota calipers. Cost me a small fortune to buy them and get the stud holes and centre hole machined to suit but I will let them go for $300 to another forum member. They are DBA 545 if you want to do some research on them.
- Attachments
-
- manifold1.jpg (58.6 KiB) Viewed 6314 times
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
Triple manifold now spoken for.
Spoiler is 1345mm wide and is slightly wider than the one on my 240Z but would still fit. It may be a 280ZX one as it's shape is also slightly different.
Pictures follow.
Spoiler is 1345mm wide and is slightly wider than the one on my 240Z but would still fit. It may be a 280ZX one as it's shape is also slightly different.
Pictures follow.
- Attachments
-
- spoiler1.jpg (30.54 KiB) Viewed 6287 times
-
- spoiler2.jpg (30.6 KiB) Viewed 6287 times
-
- spoiler3.jpg (31.38 KiB) Viewed 6287 times
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
Yes, I think the one on my 240 is the BRE style and this one I have for sale is slightly different. Happy to refund your money if you try it and don't like it.
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
Photos follow. PM me your email address if you want any more. Open to offers on the manifolds, Rotor price as above.
Happy to provide any measurements you require.
Happy to provide any measurements you require.
- Attachments
-
- manifold10.jpg (118.17 KiB) Viewed 6224 times
-
- manifold11.jpg (134.63 KiB) Viewed 6224 times
-
- rotor1.jpg (65.44 KiB) Viewed 6224 times
-
- rotor2.jpg (52.51 KiB) Viewed 6224 times
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
Brake Rotors not spoken for any longer.
Lozgod and Stumpy, I am trying to PM you but my Outbox is not working so please be patient while I find out why my messages are getting stuck.
Lozgod and Stumpy, I am trying to PM you but my Outbox is not working so please be patient while I find out why my messages are getting stuck.
Last edited by old_datto_fan on Thu Aug 20, 2009 9:21 pm, edited 2 times in total.
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
I may have a complete rear bumper but not sure if it is 240Z, 260Z or 2+2. I did have a right section but that is sold.