Hi there
Ive got a Z31 200ZR with the red top RB20DET with the NICS syestem on it and the injectors are leaking.
Ive been looking for replacements for a while now but with not much luck,
Ive got the Nissan part number 16600 59S09 from Nissan but they are $550 each, so could anyone tell me what after market ones i can use.
Ive seen these on trademe but Iam not 100% sure they will do the job https://www.trademe.co.nz/Browse/Listin ... 1522339875
Any advise would be much appreciated.
Thanks
Billy
Replacement injectors for a 200ZR
-
- Posts: 23
- Location: Hamilton
I am notlooking to upgrade them I just want to put standered ones back in there
Thanks
Thanks
- reliablejunkie
- Z Club Member
- Posts: 188
- Location: Riccarton, Christchurch
Hey, I am currently selling some RB20DET injectors. Someone swapped an RB20DET engine into a 280zx that I bought but I intend on restoring the car back to factory. I have almost sold everything but the injectors are still here. I have put new pintel caps and filter buckets on the injectors, they will need new O rings however. The O rings currently on the injectors were a set that I had lying around but they won't provide a good seal in your fuel rail. If a set of second hand ones are acceptable for now then PM me.
Here is a link to the image of the injectors.
https://imgur.com/a/0XaYc
Tristan
Here is a link to the image of the injectors.
https://imgur.com/a/0XaYc
Tristan
Someone had to make up for all the pollutants these hybrid cars are saving these days, so i cranked up the fuel pressure and let the engine roar.
1983 280ZX L20ET engine with an N42 head running on megasquirt ECU
1983 280ZX L20ET engine with an N42 head running on megasquirt ECU
-
- Posts: 23
- Location: Hamilton
Sorry they are the wrong type
I need ones with the hose on the top type with low impedence for the early red top RB engine.
Thanks
I need ones with the hose on the top type with low impedence for the early red top RB engine.
Thanks
- reliablejunkie
- Z Club Member
- Posts: 188
- Location: Riccarton, Christchurch
Ah I see, I don't know very much about the RB engines, I had no idea they had low impedance injectors at one point. Good luck with the search for the injectors. I will keep my ears out for anything.
Tristan
Tristan
Someone had to make up for all the pollutants these hybrid cars are saving these days, so i cranked up the fuel pressure and let the engine roar.
1983 280ZX L20ET engine with an N42 head running on megasquirt ECU
1983 280ZX L20ET engine with an N42 head running on megasquirt ECU