I hope nobody will cringe reading this but here goes...
Headed in to Blacks Fasteners on Saturday to see what the dealio was, I already had flywheel bolt sizes so just took the clutch & plate in (9 bolt). I can get the bolts I need for under $20, but I need a rough idea of the tensile strength required for these bolts. Obviously their products are not primarily automotive use. So, does anybody know the tensile rating or where would I get a set of clutch bolts (or if anybody has some lying around).
Thanks in advance
Ben
L28 Flywheel and Clutch Bolts
L28 Flywheel and Clutch Bolts
In a long distance relationship with my 260z
- old_datto_fan
- Z Club Member
- Posts: 951
- Location: Kapiti
Personally, I would be using new ones and the genuine part. I'm pretty sure I got some via my local Nissan dealer a few years back but Motorsport Auto have them - I have just received some bits from them that I ordered last Monday so shipping times not too bad.
See http://www.thezstore.com/page/TZS/PROD/21-3022 for the bolts you need.
See http://www.thezstore.com/page/TZS/PROD/21-3022 for the bolts you need.