Seat Bracket for a Jamex seat...

MasterJay · Post by **MasterJay** » Thu Aug 28, 2014 1:06 am

Has anyone got or know the best place to get a drivers side seat bracket to suit a Jamex seat?
All I can find are LHD Drivers brackets....

BRONZEE · Post by **BRONZEE** » Thu Aug 28, 2014 6:15 pm

MasterJay wrote:Has anyone got or know the best place to get a drivers side seat bracket to suit a Jamex seat?
All I can find are LHD Drivers brackets....

You could try asking the crew over on 350z-uk.com, as they're right hand drive too. Let us know how you get on, in case anyone else has the same request at some stage.

limezed · Post by **limezed** » Sat Aug 30, 2014 1:36 am

Try Keith at Jamex in Auckland jamex.co.nz

MasterJay · Post by **MasterJay** » Sat Aug 30, 2014 7:51 pm

Yes I tried Keith at JAMEX but he said he cannot get me a 350z seat bracket.
I have had a look on uk forum but could not find anything directly related however....

Today I actually got the seat out of storage (where it has been since I lost my house in Feb'11) to find it has rails on it already!
Now that I think about it, I do remember ordering some rails for it many years ago so I think all I need is a 350z seat bracket with the holes in the right place.

I think the type of bracket I need is a RHD Drivers Seat in the MO or RO type which I can either match up to the rails or drill my own holes....
I have attached a pic of my seat where A= 40cm and B= 31cm
Can anyone tell me if they have bought a seat bracket which might look like it will fit?

Cheers,

J

Karljsw · Post by **Karljsw** » Sat Aug 30, 2014 9:54 pm

Trademe 350z seat rails $200 buy now in wellington

http://www.trademe.co.nz/motors/car-par ... 569757.htm

or these ones from NZKW at $350 a pair suppose to fit 350z

http://www.trademe.co.nz/motors/car-par ... 282279.htm

chrismx5 · Post by **chrismx5** » Mon Sep 01, 2014 9:55 am

Sorry still getting used to this forum!

Are you located in Auckland by chance?

MasterJay · Post by **MasterJay** » Mon Sep 01, 2014 10:53 am

I am in Christchurch.
I only really need 1 bracket so $250 for 2x is a bit more than I need.
I am thinking about getting one of these for $160 incl shipping to chch but just waiting for dimensions between the holes to be posted...
http://www.trademe.co.nz/Browse/Listing ... =772712875

chrismx5 · Post by **chrismx5** » Mon Sep 01, 2014 10:57 am

Ahh! Bummer.

Well PM me the dimensions (if you get a chance) I have heaps of steel at home I will see if I can knock something up for you.