hey guys
my brake master cylinder is leaking where it joins onto the booster.
just wondering if anyone has rebuilt one before or know where to get a kit to rebuild one? have done a Google search to no prevail.
other wise I'll have to get a new unit off ebay which might end up being the cheaper option
280zx brake master
Start with the 15/16" (if you can find one) there are many variables, engine weight, swept area, calliper piston size, pedal ratio, proportioning ratio etc.
The 15/16" swap appears most common and is the easiest, your results may differ.
A twin master cylinder setup is the most configurable but is far from stock.
The 15/16" swap appears most common and is the easiest, your results may differ.
A twin master cylinder setup is the most configurable but is far from stock.