L28 Flywheel and Clutch Bolts

If your post does not fit under any of the other technical forums post it here
Post Reply
User avatar
HasMilk
Posts: 171
Location: Wellington

L28 Flywheel and Clutch Bolts

Post by HasMilk » Mon Sep 21, 2015 9:25 pm

I hope nobody will cringe reading this but here goes...
Headed in to Blacks Fasteners on Saturday to see what the dealio was, I already had flywheel bolt sizes so just took the clutch & plate in (9 bolt). I can get the bolts I need for under $20, but I need a rough idea of the tensile strength required for these bolts. Obviously their products are not primarily automotive use. So, does anybody know the tensile rating or where would I get a set of clutch bolts (or if anybody has some lying around).

Thanks in advance
Ben
In a long distance relationship with my 260z

User avatar
old_datto_fan
Z Club Member
Posts: 951
Location: Kapiti

Post by old_datto_fan » Mon Sep 21, 2015 9:47 pm

Personally, I would be using new ones and the genuine part. I'm pretty sure I got some via my local Nissan dealer a few years back but Motorsport Auto have them - I have just received some bits from them that I ordered last Monday so shipping times not too bad.

See http://www.thezstore.com/page/TZS/PROD/21-3022 for the bolts you need.

User avatar
HasMilk
Posts: 171
Location: Wellington

Post by HasMilk » Tue Sep 22, 2015 9:27 pm

Yeah I shall get an idea from Nissan also, from the web store will probably cost me around $120.
In a long distance relationship with my 260z

Post Reply