Early A series gearbox crossmember dims

Answer to most of the common technical questions
Post Reply
User avatar
240znz
Posts: 254
Location: Christchurch

Early A series gearbox crossmember dims

Post by 240znz » Wed Oct 31, 2007 3:36 pm

My crossmember has been mangled badly and I'm about to fabricate a new unit. One side is hiogher than the other and I'm not sure if this is a stock thing but I doubt it. If anyone has a unmolested one handy that they could measure up, I'd apprecaite it.

These only came out on the early 240z's so if you have a 72-73, you'll have a differnent crossmember to mine.
Zed NOT Zee

12/70 HS30-00352
1973 240Z rust car

User avatar
Stumpy
Posts: 137

Post by Stumpy » Thu Nov 01, 2007 10:28 pm

I can pull mine out for you and measure up on the weekend for you. Should be able to do it saturday arvo? It is for the 4 speed box aye.

User avatar
240znz
Posts: 254
Location: Christchurch

Post by 240znz » Fri Nov 02, 2007 9:34 am

Cheers Stumpy,

I've got the measurements I need from our friends at classiczcars.com

James
Zed NOT Zee

12/70 HS30-00352
1973 240Z rust car

Post Reply