Hi guys

Mopar300 · Post by **Mopar300** » Tue Aug 30, 2016 8:03 pm

Hi guys, sorry it's been a while but I've managed to get some more done.... Re made the 4 link suspension so it has adjustability now.

Mopar300 · Post by **Mopar300** » Tue Aug 30, 2016 8:05 pm

Also have made parts of the rear floor behind the tubs and re made the fuel tank, cross members and mounts.

Mopar300 · Post by **Mopar300** » Sat Sep 24, 2016 4:14 pm

Just done the rear floor and fuel tank. Wanted to keep the fuel tank nice and high. It basically sits in between the chassis rails now and in line with the diff head. The fuel filler is in the rear of the car kind of torana style. The down side to this is the entire fuel system needs to be sealed from the cabin so I had to make quite an elaborate floor to seal the filler in the rear panel to the under side of the car. Just need to figure out a new locking system for the hatch now as the filler pipe sits where the latch was....

Mopar300 · Post by **Mopar300** » Sat Sep 24, 2016 4:15 pm

Filling through the rear....

Greensheep · Post by **Greensheep** » Sat Sep 24, 2016 9:51 pm

Wow great progress

Keep the posts coming
Is the plan to show the finished car?

Mopar300 · Post by **Mopar300** » Thu Feb 09, 2017 7:15 pm

Hi guys, it's been a while. I have been doing a bit of panel work and built a rotisserie so I can roll her over to help doing underneath her.

Mopar300 · Post by **Mopar300** » Thu Feb 09, 2017 7:18 pm

Had to deal the new tank under the floor but have it being able to be filled through the rear panel.