350Z Goodies

Old classifieds threads worth keeping around
Locked
User avatar
OMSIN
Posts: 265
Location: Hamilton

350Z Goodies

Post by OMSIN » Mon Oct 06, 2014 6:19 pm

I have a set of four Factory 18" 350Z bronze alloys, Tyres still mounted three ok - one worn. Looking for about $500, quick sale

I also have a Motordyne MREV2 lower plenum and Stillen High flow intake, offers? seeing if theres any interest. Car is being sold this week / weekend
Last edited by OMSIN on Mon Oct 06, 2014 8:59 pm, edited 1 time in total.

Greensheep
Z Club Member
Posts: 163
Location: Auckland

Post by Greensheep » Mon Oct 06, 2014 6:36 pm

Any chance of a photo of the alloys?
It's always a good day when you drive a Z

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Mon Oct 06, 2014 7:56 pm

Yes, will take a few photos shortly. Just got to move a few things :)

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Mon Oct 06, 2014 8:55 pm

I know I said $500 in my original post, but would $600 be a deal breaker :), I've just had a quick look at what some people have been trying to sell theirs for :shock:

2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Greensheep
Z Club Member
Posts: 163
Location: Auckland

Post by Greensheep » Tue Oct 07, 2014 5:53 pm

Thanks for the photos
Will have to think about it and see if the budget will stretch
Looking to fit them on my 300zx
I have seen several on YouTube with this style of wheel, which look really good
It's always a good day when you drive a Z

User avatar
andy_cliff
Posts: 130
Location: Christchurch

Post by andy_cliff » Wed Oct 08, 2014 9:15 am

OMSIN wrote:I know I said $500 in my original post, but would $600 be a deal breaker :), I've just had a quick look at what some people have been trying to sell theirs for :shock:

2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
Good price! :)

How much are you looking at for the lower plenum and or the intake boss?

Cheers!

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Wed Oct 08, 2014 5:44 pm

andy_cliff wrote:
OMSIN wrote:I know I said $500 in my original post, but would $600 be a deal breaker :), I've just had a quick look at what some people have been trying to sell theirs for :shock:

2x Yokohama Tyres, 1x Bridgestone Potenza, 1x Worn Toyo. (Bridgestone tyre replaced the other Toyo that had a puncture).
Good price! :)

How much are you looking at for the lower plenum and or the intake boss?

Cheers!
Yea, figured I'd be nice seeing as its a club an all :)

Make an offer, Just keep in mind The MREV2 / spacer package and Intake would cost $900+ US ex postage

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Fri Oct 10, 2014 7:14 pm

Also have Test pipes and dual resonated high flow Y pipe, ZERO rasp.

I will need to know if anyone is interested soon otherwise it will stay on the car :)

P.s that also applies to the MREV2 package, as I don't want to take it off for nothing

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Sun Oct 12, 2014 11:12 am

Last chance before it goes on Trademe

$500 for the wheels :)

Will take offers anywhere around $400 for the MREV2 plenum + spacer and Stillen intake (hasn't been installed very long)

Fung
Posts: 22
Location: Auckland

Post by Fung » Sun Oct 12, 2014 12:52 pm

OMSIN- I have pm you

Greensheep
Z Club Member
Posts: 163
Location: Auckland

Post by Greensheep » Mon Oct 13, 2014 10:22 pm

Hi from what I can find it looks ok
The std 300 runs 225 50 R16" and the numbers look like this

16" x 7.5" (190.5)  45mm offset = mount face to outside edge 50.25mm = mount face to inside edge 140.25mm

Your wheels are called touring 18" v.2 and are staggered
18" x 8"  (203.2)  30mm offset = mount face to outside edge71.6mm = mount face to inside edge 131.6mm

18" x 8.5"  (215.9)  33mm offset = mount face to outside edge 75mm = mount face to inside edge 140.9mm

The outside edge will be close to the guard (may need to roll the inner lip )
But the inside will be fine

This just leaves the difference in tire size 43.6mm taller for the 245 45 R18s
The only way will be to test fit, unless anyone reading has any experience with the z32 and fitting 350z touring 18" v.2 alloy wheels and tires?
It's always a good day when you drive a Z

User avatar
andy_cliff
Posts: 130
Location: Christchurch

Post by andy_cliff » Tue Oct 14, 2014 10:31 am

OMSIN wrote:Last chance before it goes on Trademe

$500 for the wheels :)

Will take offers anywhere around $400 for the MREV2 plenum + spacer and Stillen intake (hasn't been installed very long)
Hey OMSIN, would you consider selling the spacer separately? :) As im looking at buying one online, but if I can help you out, I may aswell.

If so, what brand is it & what size?

Cheers!

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Tue Oct 14, 2014 12:31 pm

Greensheep wrote:Hi from what I can find it looks ok
The std 300 runs 225 50 R16" and the numbers look like this

16" x 7.5" (190.5)  45mm offset = mount face to outside edge 50.25mm = mount face to inside edge 140.25mm

Your wheels are called touring 18" v.2 and are staggered
18" x 8"  (203.2)  30mm offset = mount face to outside edge71.6mm = mount face to inside edge 131.6mm

18" x 8.5"  (215.9)  33mm offset = mount face to outside edge 75mm = mount face to inside edge 140.9mm

The outside edge will be close to the guard (may need to roll the inner lip )
But the inside will be fine

This just leaves the difference in tire size 43.6mm taller for the 245 45 R18s
The only way will be to test fit, unless anyone reading has any experience with the z32 and fitting 350z touring 18" v.2 alloy wheels and tires?
Test fit will be fine, will just have to arrange a suitable time. The car dealer has mounted 245 45s 18 tyres on all rims, so not sure which are front / rear from factory, just how they were before they were taken off

User avatar
OMSIN
Posts: 265
Location: Hamilton

Post by OMSIN » Tue Oct 14, 2014 6:03 pm

SOLD SOLD SOLD.

Just waiting on a test fit / sale on the wheels.

Thank you all

Locked