FS: New Japanese L6 Triple Intake Manifold

Old classifieds threads worth keeping around
Locked
User avatar
nzeder
Site Admin
Posts: 1503
Location: Auckland
Contact:

FS: New Japanese L6 Triple Intake Manifold

Post by nzeder » Fri Nov 23, 2012 10:32 am

I have one too many intake manifolds and need $$ to go towards a set of triples from another club member.

This manifold is new - never used and would cost over $900 land if you were to import your self today (they sell for $750 AUD = $1000NZD due to our poor exchange rate)

It comes with the idler shaft and intermediate shaft for fitting to the stock 240z/260z firewall pivot bush thing. Also on the idler shaft is a cable pull option. It comes with o-ring soft mounts and will require the purchaser to source drop links and correct length M8 studs/nuts for your setup. The price reflects the absent drop links that I am using on my already ported intake manifold.

Again this is brand new and not touched/ported it has 45mm bore at the carb end and 35mm at the intake which matches the stock port size on a L28 head. There is lots of alloy on this intake allowing for large porting if required which is not the case on a number of the cheaper intake manifolds that are available.

I will get some pics up later today of the actual item but here is a sample pic

Image

Asking $500 PM if interested.

Cheers
Mike

User avatar
nzeder
Site Admin
Posts: 1503
Location: Auckland
Contact:

Post by nzeder » Sat Nov 24, 2012 7:42 pm

Pics of actual item
Attachments
PIC000015.jpg
PIC000015.jpg (1.84 MiB) Viewed 3641 times
PIC000016.jpg
PIC000016.jpg (1.83 MiB) Viewed 3641 times

User avatar
nzeder
Site Admin
Posts: 1503
Location: Auckland
Contact:

Post by nzeder » Sun Dec 02, 2012 4:07 pm

Sold

Locked