Wiring loom

General natter about Datsun/Nissans
Post Reply
motorman
Z Club Member
Posts: 7
Location: Te Awamutu

Wiring loom

Post by motorman » Sun Aug 30, 2020 11:09 pm

Hi Guys
Finally stripped the Zed for rebuild (just got hood liner and diamond paneling to go). Bit of a mission as the guy who put the injected 280 motor and box in did a very good job of it. Along with all the 280 wiring and computer (as you would have to) right down to the heater fan box with an electric element in it. So my problem is to sort out what I need to keep as I am going back to all the original motor/carbs/ignition etc. But I do have a blown up wiring diagram. So are there any wiring looms out there to buy or even something I can look at (out of a car) to help me where I'm going. Thanks Zeder's'.

Post Reply