Hi Mike, I recall someone on the BSR page mentioned he might make a copy of the BSR cover... It didn't get much attention as idiots like me who paid a bomb for one of the 150 that were made didn't want them to drop in value. B-Speed covers though are very nice! PDM is definitely the way to go, super...

Engine finally looking ready for action...
Car getting ECU/PDM/Dash/Keypad programming ready for dyno day.

Hi Mike, Thanks, its not far away... Engine got a new Kameari 77i cam, Titanium retainers etc... And body got a new seat and some decals. Wiring all in and ready, motor, gearbox and drive line all in, as well as fuel cell etc... https://i.imgur.com/gwTdewfl.jpg https://i.imgur.com/cVOKLNrl.jpg https...

Try Nick Omar on FB market place (mira2019 on trademe).
He is always wrecking them and has a few at the moment,

In case you don't follow the FB page, here is a few recent updates. A few pictures of a clean white interior... Yes, it's back from the painters a few weeks ago. The assembly has started. Today fitted the rear lights, fuel cell, dry brake, Diff cooler pump, rear brakes, and bits & pieces. Also t...

Hi, We are considering build a 280Z race car for the ChampCar Endurance Series. It's amateur racing. We are concerned about the rear suspension. How did you configure your rear suspension? Is your rear suspension stock? Or are you using an aftermarket rear suspension? How large are your rear tires?...

There is no way to convert the Z33 nav system to english. You can do it on the Z34 but not Z33. The Z33 menu is quite simple, so if you use your phone camera and translate it, you can set up your phone bluetooth etc. As for the centre cubby, you can get them from a wrecker or buy new OEM. I bought n...

Thanks, and to you to!

Thanks guys, yeh it's down to weeks now rather than years...
It will miss out on Pukekohe but only just.

Well, I won't bore you with lots of FRP fix photos, just the end result, A number are posted on my FB build page. This is the first time it actually looks complete in nearly 20 years! Interior/engine bay and exterior touch up painting has been delayed until late January, with decals to follow. Just ...

Welcome aboard from a fellow Z33 owner.

Ok, an update for this forum... All welding is now complete. Had to weld up the sills and added air-jack tubes front & rear. The roll cage was also amended to give more head room and add a new cross brace for the new steering column. Exhaust headers were ceramic coated by Pro-Coat in East Tamaki...

Wow, big change! Good luck with the sale!

You could try Paul Cross on FB, may be a long shot for a Z31 rear louver though...

A few little changes since the last post. New slotted brake rotors all round and new pads, and new fluid. New rear diff bushes all round. Apparently the OEM center bush was a mission to get out. (I got some pro's to do it!). The diff got a make over whilst it was out, as well as new diff oil. The re...