Try Keith at Jamex in Auckland jamex.co.nz

Nzeder - as well as sorting out other peoples Z's. Top man!

I'm liking the colour !!

Some terrible acts of vehicular molestation occurred during the late 1970’s and early 1980’s. Louvred rear windows, fluffy dice, lake pipes, two tone paint, velour upholstery. But nothing so bad as the “Sun roof”. O A device designed to weaken the structural integrity of the car, promote the rate of...

Jamex seats are (were) $220 from http://www.jamex.co.nz/

Nah your just going faster now Andy. The fumes can't keep up!!

The last one I saw as good as yours was the one at Moorehouse motors a year or so ago. Also a Safari Gold example, RHD but can't remember the milage. rhat one was there at $30k as well. The guy that races the 302 Windsor Sierra (South African factory) has a tidy one for $40k, and the 112 coloured on...

Clown in a R35 "GUN GTR" pulling out in front of traffic on Albany highway.

Will wait till they weld two together in an L6 format.

There you go NZeder - just what the green 260's been waiting for.

Superstar, must get an autograph next time

Try to remember us little fellas. Good luck,

Oops that first line might have come out wrong. Meant to say that quick fixes are not always the best.

Hang on that sounds no better.

Go with don't keep the old tacho under your dash.

Sometimes things we do late at night in the shed are not the best way to do it.

No need for extra power, just get one of those "Cooper" special air dams. I hear they are worth 7 seconds a lap.

'Twas a bit wet but much fun. Damn auxiliary tacho's.
Roll on icebreaker.

Not the Zed, but started putting the coil over fronts and four link coil over rear into the '66 fastback. Now there is nothing high performance about these old Mustangs. They are more like a truck than a sports car. I can't remember ever using 1" bolts on a Zed's suspension.

If I understand you correctly then; The outer links have a small (m6 / m8) bolt up from the bottom of them. This holds them in place on a flat spot on the rod. Remove the bolt and they should come out easy.