too right Glenn, Im looking at a 3d laser sintered titanium crank trigger mount for the RB, it look fuggin smashing.... In the voice of Austin Powers "Its made with a lazer!" Will improve ECU trigger stability, meaning better accuracy of ignition and injector timing = more reliable hp... I...

Sintered from nylon powder via laser, so I made a handful if anyone needs them. They are not super exact, but fit tight. Either side gas pedal mounts, and the little door handle crank bush that goes in the door. http://i445.photobucket.com/albums/qq177/gaijin240z/20141224_113009.jpg Have a safe and ...

Since I cant get hold of a few miserable little bits I've cad'd them up and have had them made in a batch of ten.
Pick them up shortly, made in Nylon.

Since the Celica is almost re-wired, better hurry the zed up some more. Take Papua New Guinea dash over to dashboard restorations in Glenfield for some loving. Back log of work there until late Jan, yikes, better get it in then. Car also booked in with Dan Slater in Jan to complete some minor fiddly...

probably chuck some pics up to make some sense. http://i445.photobucket.com/albums/qq177/gaijin240z/240z%20brook%20st/20141125_132304.jpg http://i445.photobucket.com/albums/qq177/gaijin240z/240z%20brook%20st/20141125_132254.jpg I have the right side where the c clip goes into the bush to stop horizo...

PM'd, thanks Mike

Thanks Mike,

Seems like I have misplaced/lost/never had part no. 18021-E4100
Bush Accelerator pedal.
Any ideas if the part was shared with any other Datsun I could help the search to get one?

I note that there is 9 variants of gas pedal. Sheesh.

Got one door sussed, called Dave Turner for some tiny collar thats missing. Gas pedal showed its face, along with some new strikers I ebayed gas pedal rubber more like super hard unbendable material http://i445.photobucket.com/albums/qq177/gaijin240z/240z%20brook%20st/20141119_152846.jpg Butcher it ...

So some NOS stuff turned up to get into the doors, new rhs window regulator, minor miracle to find one of these... http://i445.photobucket.com/albums/qq177/gaijin240z/240z%20brook%20st/20141117_104303.jpg http://i445.photobucket.com/albums/qq177/gaijin240z/240z%20brook%20st/20141117_105734.jpg door ...

nzeder wrote:Congratulations just get it done before you have more don't want to be like some of us with a 17 year project and now 4 kids

Couldnt agree more there. But as Rick said to me years ago while the misses was pregnant, its all good, give it a few years once they are out, then get back into it.

To aid productivity to the zed, get rid of the culprit! Free some space up in the garage too. I've spent the last 2.6 years working on this car, thats what I've been up to. That and house renovations and working and family etc. Promise. ANyway, time to move on Celica, you have had your time black de...

Like Godzilla in hibernation, it must wake up some time right... The help came in the form of the Toyota moving house for a while so I can focus on the where the heck I left the zed in terms of works. I remember a heap of issues all over the place and getting a bit overwhelmed. SO after a good clean...

He's been working on another car. Thanks Bronzee, Yup, working rather hard on another car, TA22 Celica. Its close to being finished, so the zed has had a few days spent here and there on it with finishing details, putting NOS stuff on it, lots of gaskets, rubbers, fuel fill pipes etc that have come...

yip, too much going on and no action up the back section...... Chop chop then! http://i1086.photobucket.com/albums/j456/gaijin1011/gaijin%20start7%20110903/DSCF2083.jpg http://i1086.photobucket.com/albums/j456/gaijin1011/gaijin%20start7%20110903/DSCF2084.jpg http://i1086.photobucket.com/albums/j456/...

Progress?

Umm, chipping away for sure.
My mobile internet is ultra slow at the current address hence the lack of posting.

I have made progress with the car, and will post shortly.

thanks