cheers guys for the help over the years with info and advice but sold the zed in the weekend after the dyno broke my engine so took a hit on the price but now i dont have to worry about not being able to drive it anymore
on to new things
cheers nathan

yes no visible cracks in the dash very rare indeed

hello guys have been offered a left hand drive 240z by a local guyy who has had it for a few years. had a look at it tonight it is in really really good condition and at 5k seems to be a bargin but he has no import paperwork and the guy he bought it off from auckland has gone overeas. can anyone hel...

yes needs cert also becarefull about offset and tire width. their are rules on how big your spacer can be in regards to the wheel width and offset. i had to stick to 15mm which was just enough to clear the springs. it is propotional to tire width the formula is on the lvv website but pretty much the...

got wheel alignment done, brakes bleed and oil change. spare altanator, spark plugs, radiator hoses and fuel pump. tools loaded helmet and suit.
what am i forgetting see everyone tomorrow.
cheers nathan

just a question about overalls have read appendix 2 schedule a and states the materials that comply but was looking on trade me for some race ones and some listed as race\kart and only 65% cotton i asked what the other material was and told polycotton, didnt think that was allowed can zclub tell me ...

is a fire exstinguisher a requirement for street cars

thanks dj just been through the wiring diagrams i downloaded and yes open with door will have to see why they not working. also yes it pulses but not an issue for ecu as im running alpha N tune so rpm based not map will have to look at tapping the other three or buy 12v vac pump then i wont have any...

was working on wiring up the new rad fans to the old ac switch in the zed today and missed a bare wire that was touching some metal and burnt out the fusable links. If anybody has a spare that they are willing to part with that would be great just got normal wire their at the moment so not ideal. al...

thats the plan imogen pretty standard track car 6 pots front and 4 pot rears with the biggest rotors i can fit inside the rims.

got the flares today for the new project tapped them up to see what they would look like not sure if they suit the car or not and maybe should have got the smaller less wide ones. at least the 18x10's will fit in the rear now. http://i1300.photobucket.com/albums/ag96/wikedzed/IMG_20140904_164229_zps...

finally got the custom airbox on tonight just waiting for a silicone bend to place the filter towards the front to get some cold air, have drilled for the second set of injectors to fire at the ram tubes but have just bunged them for now untill i drop the big motor in with the ported head. http://i1...

those itbs on the rb25 have a great sound all of their own. envy

finally got the pallet of goodies from the states only took 3 months must have been a small slow boat. fitted the new turbo to the l20et looks to be fine for clearances also got the new chrome molly flywheel and 6 puk clutch kit http://i1300.photobucket.com/albums/ag96/wikedzed/IMG_20140801_133345_z...

put new steering wheel on tonight
[/img]