I have been searching high and low for a r180lsd from a sti or a r200lsd from a z31 for my Rb26dett 240z Starting to consider a complete subframe from technotoytuning. But would rather not spend 3,000 usd to put a solid diff in my car. Any help on finding a diff or a solution would be great. Thanks ...

Anyone know what to use for stub axles or input shafts into the diff?

Took arm off and it was really bent. All fixed with new control arm. Once 26det is running, I plan on adjustable arms anyway so itll all be adjusted to suit the new set up then

I'll take the bent one off and line if up with the straight side and check. For a wheel alignment, they said it was out but there is 0 adjustment in the rear

So I should track down a new lower control arm or just buy an adjustable set?

I have recently installed polyurethane bushes, so it sounds likes it's been bent then, cheers

I have put xyz coil over suspension through out the car and reinstalled all suspension components and upgraded to bigger wheels, I have realised that the rear right wheel is 15mm away from the front of the wheel arch, on the other side it's closer to 30mm. This causes rubbing. Does anyone know why t...

My brakes system has been sitting with clamped hoses as I installed coil overs and replaced all the bushes, when I went to reinstall and bleed my brakes, all the fluid has disappeared and after trying to bleed the brake system, and no more air bubbles. There is still very little brake pressure. Is t...